×
EN
CN
Position: Home / Our Services /

Our ServicesOur Service

Contact Us

Mechanical property test

Test item background


Hardness is the ability of metal to resist deformation or fracture in local volume of surface. It not only has an approximate empirical relationship with static strength and fatigue strength of materials, but also has some indirect relations with cold forming, cutting and welding properties. Therefore, the hardness value has a certain reference significance for controlling the quality of material cold and hot processing technology.

Static tension can measure the elastic deformation, plastic deformation and fracture process of the most basic mechanical properties, including modulus of elasticity, yield strength, tensile strength, elongation and section shrinkage. These performance indicators are the inherent basic properties of materials and an important basis for engineering design.

Impact test can obtain dynamic performance indexes such as impact toughness and impact absorbing power. It is very sensitive to the critical brittleness tendency and metallurgical quality and internal defects of materials in use. It is a very convenient way to check the brittleness tendency and metallurgical quality of materials.

Testing equipment: material universal testing machine, impact testing machine, fatigue testing machine, all Rockwell hardness tester, Vickers hardness tester, Brinell hardness tester, Richter hardness tester, etc.

 

Testing items and standards


Test projectTest standard
Hardness (Brinell hardness, Rockwell hardness, Richter hardness, Vivtorinox hardness, etc.)GB/T 231.1-2002，GB/T 230.1-2004，GB/T 17394-1998，GB/T 4340.1-1999，ISO 6507-1:2005(E)，JIS Z2252-1991
Normal temperature tensionGB/T 228-2002，ISO 6892:1998，GB/T 5027-1999，
GB/T 5028-2008，GB/T 24174-2009
High temperature tensileGB/T 4338-2006
Low temperature tensileGB/T 13239-2006
BendGB/T 232-1999
Shocks (room temperature shocks, low temperature shocks, high temperature shocks)GB/T 229-2007
FatigueGB/T 4337-2008，GB/T 3075-2008，GB/T 6398-2000
Cupping processGB/T 4156-2007
Drawing and Drawing LoadGB/T 15825.3-2008
Cone cupGB/T 15825.6-2008
ReamingGB/T 15825.4-2008

 

In addition, the metal laboratory also provides compression test, shear test, torsion test, flattening test, fastener mechanical properties test and welded plate (pipe) mechanical properties, including: deformation, fracture, adhesion, creep, fatigue and so on.

| Web Map | Terms | Privacy Protection | General Terms |

SU ICP No.06021871-1